PLASTIVERD LBL300 is a highly modified copolymer of PET (Polyethylene-Terephthalate), delivered in resin pellets. This resin has a very slow crystallization speed and is suitable for a wide range applications. The resin has a neutral tone colour and high transparency in thick cross sections.
|Intrinsic Viscosity||dL/gr||0’62 ± 0’02||LQ-M-001|
|Colour L||–||≥ 84||ASTM 6290|
|Colour b*||–||≤ 0||ASTM 6290|
|Specific Density Crystalline||g·cm-3||1’37||–|
|Weight of 20 chips||mg||320||–|
|Typical Moulding Temperature||ºC||270-270||–|
|Drying Conditions – Temperature||ºC||150-160||–|
|Drying Conditions – Time||h||5-6||–|
All proper are measured under laboratory conditions by the analytical method shown. Method LQ-M-001 is based on ISO 1628.
Different methods or conditions of analysis may give different values. Purchased material will be accompanied by Certificate or Analysis, with representative average values of specified properties.
For queries or further information relating to this statement summary document please contact with Costumer Service