PlastiVerd FAST FLOW +
Fast Flow + is a copolymer of PET (Polyethylene-Terephthalate) delivered in resin pellets. It is particularly suitable for two-stage stretch blow moulding processes. It has been specially developed for packaging of highly carbonated soft drinks. Fast Flow + has excellent mechanical properties and will provide outstanding performance in blow moulding processing speed, with class-leading energy saving. In addition, it has been formulated to give a step-change enhancement in bottle aesthetics with visibly improved clarity compared to other competitive CSD reheat resins.
| SPECIFICATIONS | |||
|---|---|---|---|
| Property | Unit | Value | Test Method |
| Intrinsic Viscosity | dL/gr | 0’84 ± 0’02 | LQ-M-001 |
| Colour L | – | ≥ 78 | ASTM 6290 |
| Colour b* | – | ≤ 0 | ASTM 6290 |
| Acetaldehyde | ppm | ≤ 1 | LQ-M-004 |
| TYPICAL PROPIERTIES | |||
|---|---|---|---|
| Property | Unit | Value | Test Method |
| Specific Density Crystalline | g·cm-3 | 1’39 | – |
| Moisture | % | < 0’2 | – |
| Bulk Density | Kg·m-3 | 840 | – |
| Weight of 20 chips | mg | 320 | – |
| Melting Point | ºC | 240-250 | – |
| Typical Moulding Temperature | ºC | 270-290 | – |
| Drying Conditions – Temperature | ºC | 165-175 | – |
| Drying Conditions – Time | h | 5-6 | – |
All proper are measured under laboratory conditions by the analytical method shown. Method LQ-M-001 is based on ISO 1628 and LQ-M-004 is based on ASTM F2013. Different methods or conditions of analysis may give different values. Purchased material will be accompanied by Certificate or Analysis, with representative average values of specified properties.
Food Contact Statement: Fast Flow + complies with the composition of requirements of the Regulation (EC) No 10/2011 and the EU directive on Packaging Waste (94/62/EC) and its amendments. For more information, contact your local Plastiverd representative.
For queries or further information relating to this statement summary document please contact with Costumer Service
